Volt Meter - Tech Station

Tech Station Voltage Tech Meter — v1.3

Fast. Accurate. Consistent. Built for race-day tech.

The Tech Station Voltage Tech Meter is a purpose-built battery voltage inspection tool designed to make RC race tech faster and easier. Instead of interpreting numbers on a traditional multimeter, Tech Station provides an immediate color-coded PASS/FAIL result along with audible feedback, helping racers and race officials quickly verify battery voltage.

A high-precision voltage monitoring system provides accurate, repeatable measurements, while selectable Oval and On-Road profiles allow the unit to be configured for different racing rules and voltage limits.

Features

• 1S & 2S automatic detection
• High-precision voltage monitoring
• Large, easy-to-read voltage display
• Green PASS / Red FAIL visual indication
• Short audible PASS alert
• Continuous audible FAIL warning while voltage remains over the limit
• PASS/FAIL buzzer can be turned ON or OFF
• Oval & On-Road profiles
• Independently adjustable 1S and 2S voltage limits for each profile
• Practice Mode with 0.001V display resolution
• User-adjustable voltage calibration
• Settings automatically saved
• Automatic return to Voltage Tech mode
• Startup confirmation beep

Simple Race-Day Operation

Power on the Tech Station, select the appropriate racing profile, and connect the battery.

BLACK — Below the configured PASS range
GREEN — PASS
RED — FAIL

Tech Station automatically recognizes whether a 1S or 2S battery is connected and applies the appropriate limits.

Adjustable for Your Rules

Both Oval and On-Road profiles have independently adjustable:

• 1S PASS voltage
• 1S FAIL voltage
• 2S PASS voltage
• 2S FAIL voltage

This allows Tech Station to be configured around the requirements of your track, organization, or event rather than being locked to a single rule set.

Practice Mode

Need more than a simple PASS/FAIL check? Practice Mode provides a clean voltage reading with 0.001V resolution, making Tech Station useful at the workbench and track in addition to pre-race inspection.

Power Requirements

Requires a 5V USB power supply rated at 5W / 1A minimum.

USB-A to USB-C is recommended for maximum compatibility. Some USB-C to USB-C power supplies and cables may not properly power the unit.

Designed for RC Racing

Tech Station was developed around the needs of RC racers and race officials: quick inspections, clear results, configurable rules, and repeatable measurements without unnecessary complexity.

Firmware: v1.3

Tech Station — Designed by TCR